Thompson Bros Pty Ltd

Videofied Installers

1300 50 13 37

Master Security Licence: 410402443

DCV 751 Outdoor Motion Viewer


The Outdoor MotionViewerTM Camera DCV751 is a battery operated, wireless outdoor motion activated camera designed for use in Videofied® security systems.

Motion-activated cameras are intended for applications where video verification of intrusion alarms is necessary or desired.

The DCV consists of a digital camera, a passive infrared motion detector, and S2 VIEW spread spectrum, Videofied® interactive, encrypted wireless cicuitry for secure two way communications with the control panel. The camera consists of a CMOS black and white sensor and an 85 degree, wide angle lens. Two infrared LED provide a night illumination distance of approximately 8 meters/26 feet. For motion or movement detection, a Fresnel lens inside the cover captures a 12m/40 ft wide, 90 degree angle passive infrared pattern. The base can be fixed on wall directly or by using mounting. A tamper function provides cover tamper detection.

The camera is typically installed to cover outdoor applications where there is a temperature fluctuation and areas where broad viewing/detection coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector transmits a signal and activates the camera, which captures a 10 second digital video segment. The control panel recieves the signal and responds according to system configuration/programming.

The alarm and video segment are reported via the control panel to the central monitoring station, and can also be sent to an Email address for viewing. The detector is powered by three lithium batteries that can last two years or more, depending on the amount of detector activity.

The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status.


  • S2View® - Spread Spectrum, VIDEOFIED®, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
  • Camera - CMOS black and white sensor with 85° wide angle lens and video resolution of 320 x 240 pixels.
  • Night illumination - up to 8 meters/26 feet distance using two infrared LED.
  • Motion detector - Dual-element, passive infrared with Fresnel lens for 12m/40 ft. wide 90 degree coverage.
  • Camera response - Camera begins filming in under 100 milliseconds after the PIR detects motion.
  • Supervised - transmits a check-in/status signal every 8 minutes indicating tamper state and battery status.
  • Tamper - Provides cover tamper detection.
  • Lithium batteries - up to 2 years.
  • Waterproof & Weatherproof - Camera is fully waterproof and can withstand temperatures from -20 degrees to 60°C (-10°/+140°F).


Outdoor video verification of intrusion alarms.

Electrical Data

  • Power requirements - Three 3.6 V batteries
  • Battery type - Lithium, LS14500
  • Battery life - Up to 2 years
  • RF technology - S2View®
  • Radio type - Spread Spectrum Bidirectional
  • RF Operating frequency - 920 MHz
  • Transmission security - AES algorithm encryption
  • Supervision Polled signal - every 8 minutes
  • Antenna - Integrated
  • Tamper detection - Cover tampered
  • Camera sensor type - CMOS black and white
  • Camera resolution - 320 x 240 pixels
  • Camera sensitivity - 0.2 lux
  • Camera lens - Wide angle 88°
  • Camera response - Less than 100 milliseconds after PIR detection
  • Video sequence - in intrusion 5 frames/s for 10 seconds
  • Night illumination - 2 infrared LED Night illumination switching
  • Automatic Night illumination distance - 8 m.
  • Motion detector technology - Passive infrared DSP
  • Motion detector type - Dual element
  • Motion Lens - Fresnel Motion
  • Detection angle - 90°
  • Motion Detection distance - 12 m
  • Motion Detection pattern - 24 facets 9 main-12 m. 8 intermediate-8 m. 5 short-4 m. 2 creep zones-1.2 m.
  • Operating temperature - -30°/+60°C
  • Maximum relative humidity - 70%, non-condensing
  • Approvals - CE / EN50131 / EN300220 / INCERT/ IDA / NCP (DCV201) / FCC (DCV601) / A-Tick (DCV701)

Physical Data

  • Material - Polycarbonate UL94
  • Dimensions - 101.6 mm x 88.9 mm x 114.3 mm (LxWxD): 4 in. x 3 1/2in. x 4 1/2 in.
  • Weight - 260.8 g/9.2oz. (without batteries)


  • Unit/Base Has a single thread for Gimble Mount (Sold Seperate)
  • Mounting Height 2.1 m (6.9 ft.)

Call or email for a free quote from us!